Effects Pedals

C35 - Allows 1 SPOT power supplies and multi-plug cables to be used with any 9VDC pedal with a 3.5mm (1/8") power jack.

CBAT - Allows 1 SPOT power supplies and multi-plug cables to be used with 9V guitar pedals that only have a battery connection.

CL6 - Allows 1 SPOT power supplies to be used with Line6 M9 and DL4, MM4, etc. series. Combine with CYR for Line6 HX Effects and Stomp.

MC8 - Allows connection of up to 8 pedals to the 1 SPOT power supply. Connect cables together to power even more pedals.

1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of

1 SPOT Technology… what does that mean and why should I care? Technically, it’s switching power supply technology, which is very different than what anyone has ever put inside a power brick. Normally, you would find just a big transformer and a handful of

CYR - Allows 1 SPOT power supplies to be used with Yamaha keyboards, samplers, and drum machines, as well as certain reverse polarity effects pedals. Combine with CL6 for Line6 HX Effects and Stomp.

Converts 9Vdc to 18Vdc and converts 12Vdc to 24Vdc automatically, without a switch! Handles up to 100mA.

A cable with a 2.1mm straight barrel and a straight 3.5mm mini plug with standard (tip positive) polarity. The 3.5mm mini plug cable connection is compatible with older/vintage MXR, DOD, Electro-Harmonix, Pro-Co (Rat series), Klon Centaur, and vintage (no

FLWR is an overdrive, distortion and sometimes fuzz! It starts very clean and gets up into Fuzz territory at max settings. It's designed to help you find your own breakup point, so your playing can stay dynamic and full range and still breakup nicely when

JFET (jay-fet) is a boost pedal rooted in my love of the JFET transistor, long-loved in the world of audio for its similarities to vacuum tubes. As always for 29 Pedals it’s a ground-up design, from a blank sheet of paper, an effort to elevate the humble

OAMP is the Output AMPlifier from 29 Pedals.

An output driver that replaces conventional buffers, line drivers and preamps, OAMP makes up to 29dB of gain, provides final signal conditioning and sweetening, and will drive lots of cable or capacitive loa